Module:Stat Factors Table

This module is meant to be used by Template:Stat Factors Table Row, which in turn is meant to be used alogside Template:Stat Factors Table.

This module returns the rows used in said table. It accept 8 inputs: skillBase, skillBonus, statMin, statMax, capImportance, capLimit, resultCols, LV, Ln

Any value not given is assumed 0. There are exceptions for the default values of Stat Maximum (99999999) and statMin (0), both of which are defined on Template:Stat Factors Table.

This can probably be further improved. Regardless, this represents a 71% improvement over the ParserFunctions method.

Examples:

{{Stat Factors Table}}

on the Butchery Efficiency page would produce:

Cooking Skill Level	CollapseButchery Efficiency
	100% Manipulation	125% Manipulation	150% Manipulation
0	75%	91.88%	108.75%
1	77.5%	94.94%	112.38%
2	80%	98%	116%
3	82.5%	101.06%	119.62%
4	85%	104.13%	123.25%
5	87.5%	107.19%	126.88%
6	90%	110.25%	130.5%
7	92.5%	113.31%	134.13%
8	95%	116.38%	137.75%
9	97.5%	119.44%	141.37%
10	100%	122.5%	145%
11	102.5%	125.56%	148.62%
12	105%	128.63%	150%
13	107.5%	131.69%	150%
14	110%	134.75%	150%
15	112.5%	137.81%	150%
16	115%	140.88%	150%
17	117.5%	143.94%	150%
18	120%	147%	150%
19	122.5%	150%	150%
20	125%	150%	150%

{{Stat Factors Table|Foraged Food Amount}}

on any page would produce:

Plants Skill Level	CollapseForaged Food Amount
	100% Sight	125% Sight	150% Sight
0	0%	0%	0%
1	9%	11.03%	13.05%
2	18%	22.05%	26.1%
3	27%	33.08%	39.15%
4	36%	44.1%	52.2%
5	45%	55.13%	65.25%
6	54%	66.15%	78.3%
7	63%	77.18%	91.35%
8	72%	88.2%	104.4%
9	81%	99.23%	117.45%
10	90%	110.25%	130.5%
11	99%	121.28%	143.55%
12	108%	132.3%	156.6%
13	117%	143.33%	169.65%
14	126%	154.35%	182.7%
15	135%	165.38%	195.75%
16	144%	176.4%	208.8%
17	153%	187.43%	221.85%
18	162%	198.45%	234.9%
19	171%	209.48%	247.95%
20	180%	220.5%	261%

Example when limit is 100%:

{{Stat Factors Table|Arrest Success Chance}}

it produces:

Social Skill Level	CollapseArrest Success Chance
0	60%
1	67.5%
2	75%
3	82.5%
4	90%
5	97.5%
6	100%
7	100%
8	100%
9	100%
10	100%
11	100%
12	100%
13	100%
14	100%
15	100%
16	100%
17	100%
18	100%
19	100%
20	100%

Example when limit is >100% but <125%: Note: Research Speed is not an appropriate use of the template, as it relies equally on two different capacities, however, at the time of writing no compatible example of an inter-column limit exists:

{{Stat Factors Table|Research Speed }}

on any page would produce:

Intellectual Skill Level	CollapseResearch Speed
	100% Manipulation	110%+ Manipulation
0	8%	9%
1	19.5%	21.94%
2	31%	34.88%
3	42.5%	47.81%
4	54%	60.75%
5	65.5%	73.69%
6	77%	86.63%
7	88.5%	99.56%
8	100%	112.5%
9	111.5%	125.44%
10	123%	138.38%
11	134.5%	151.31%
12	146%	164.25%
13	157.5%	177.19%
14	169%	190.13%
15	180.5%	203.06%
16	192%	216%
17	203.5%	228.94%
18	215%	241.88%
19	226.5%	254.81%
20	238%	267.75%

Example when skills have to be specifically defined:

{{Stat Factors Table|Plant Harvest Yield|l0=0.60|l1=0.70|l2=0.75|l3=0.80|l4=0.85|l5=0.90|l6=0.95|l7=0.98|l8=1.00|l9=1.01|l10=1.02|l11=1.03|l12=1.04|l13=1.05|l14=1.06|l15=1.07|l16=1.08|l17=1.09|l18=1.10|l19=1.12|l20=1.13}}

it produces:

Plants Skill Level	CollapsePlant Harvest Yield
	100% Manipulation	125% Manipulation	150% Manipulation
0	60%	64.5%	69%
1	130%	139.75%	149.5%
2	150%	150%	150%
3	150%	150%	150%
4	150%	150%	150%
5	150%	150%	150%
6	150%	150%	150%
7	150%	150%	150%
8	150%	150%	150%
9	150%	150%	150%
10	150%	150%	150%
11	150%	150%	150%
12	150%	150%	150%
13	150%	150%	150%
14	150%	150%	150%
15	150%	150%	150%
16	150%	150%	150%
17	150%	150%	150%
18	150%	150%	150%
19	150%	150%	150%
20	150%	150%	150%

---

Medical Skill Level	CollapseMedical Surgery Success Chance
	100% Manipulation	125% Manipulation	150% Manipulation
0	1%	1%	1%
1	120%	150%	180%
2	260%	325%	390%
3	420%	525%	630%
4	600%	750%	900%
5	800%	1000%	1200%
6	1020%	1275%	1530%
7	1225%	1531.25%	1837.5%
8	1440%	1800%	2160%
9	1665%	2081.25%	2497.5%
10	1900%	2375%	2850%
11	2112%	2640%	3168%
12	2328%	2910%	3492%
13	2548%	3185%	3822%
14	2772%	3465%	4158%
15	3000%	3750%	4500%
16	3232%	4040%	4848%
17	3468%	4335%	5202%
18	3708%	4635%	5562%
19	3952%	4940%	5928%
20	4200%	5250%	6300%

---

--local getArgs -- lazily initialized
local getArgs = require('Module:Arguments').getArgs
local p = {}
local wrap = {} -- Holds wrapper functions that process arguments from #invoke. These act as intemediary between functions meant for #invoke and functions meant for Lua.

local function unpackNumberArgs(args)
	-- Returns an unpacked list of arguments specified with numerical keys.
	local ret = {}
	for k, v in pairs(args) do
		if type(k) == 'number' then
			table.insert(ret, v)
		end
	end
	return unpack(ret)
end

--Stat Factors Table Row

function wrap.TableRow(args)
	return p._TableRow(unpackNumberArgs(args))
end
function p._TableRow(skillBase, skillBonus, statMin, statMax, capImportance, capLimit, resultCols, LV, Ln)
	--Remove local if these variables are to be used somewhere else. 
	local argumentos={skillBase,skillBonus,statMin,statMax,capImportance,capLimit,resultCols,LV,Ln}
	
	for i = 1,8 do --This should prevent errors if a number is not defined.
		if type(argumentos[i])~='number' then
			if argumentos[6] then -- In case capLimit is not correctly set.
				argumentos[6]=1000
			else
				argumentos[i]=0
			end
		end
	end
	skillBase,skillBonus,statMin,statMax,capImportance,capLimit,resultCols,LV,Ln = argumentos[1],argumentos[2],argumentos[3],argumentos[4],argumentos[5],argumentos[6],argumentos[7],argumentos[8]
	-- Do note that statMin, statMax are handled by "Template:Stat Factors Table" (including defaults)

	if tonumber(Ln)==nil then --Sanitizes input and allows for Ln=0.
		factor = skillBase + (tonumber(skillBonus) or 0 ) * LV
	else
		factor = Ln
	end

	local Pval = math.min(math.max(factor,statMin),statMax)
	R_Pval = tostring(math.floor(Pval*10000+0.5)/100).."%" -- This formats the number as a 2 digit percent value, rounded up.
--	R_Pval = string.format("%.2f", Pval*100).."%" -- While Easier to parse, this has the issue of forcing 2 decimals for all numbers.
	if tonumber(resultCols)>1 then
		Pval = factor * ( 1 + capImportance * math.min(capLimit-1, 0.25))
		Pval = math.min(math.max(Pval,statMin),statMax)
		R_Sval="<td>"..tostring(math.floor(Pval*10000+0.5)/100).."% </td>"
	else
		R_Sval=""
	end

	if tonumber(resultCols)>2 then
		Pval = factor * ( 1 + capImportance * math.min(capLimit-1, 0.5))
		Pval = math.min(math.max(Pval,statMin),statMax)
		R_Tval="<td>"..tostring(math.floor(Pval*10000+0.5)/100).."% </td>"
	else
		R_Tval=""
	end
	
	return "|-\r\n!"..LV.."\r\n|"..R_Pval..R_Sval..R_Tval
	-- There are more efficient ways, but this works.
end

-- Deep Drill Speed custom version. Includes Time in minutes (at x1 speed)
function wrap.Table_DDS(frame) --The normal unpacking is giving me issues, so this is a potential if ugly work around.
--	return p._Table_DDS(unpackNumberArgs(args))
	local args = getArgs(frame)
	return p._Table_DDS(tonumber(args[1]),tonumber(args[2]),tonumber(args[3]))
end
function p._Table_DDS(skillBase, skillBonus, capImportance)
	--statMin=0 so omitted, skill uncapped so statMax omitted.
	local argumentos={skillBase, skillBonus, capImportance}

	for i = 1,3 do --This should prevent errors if a number is not defined.
		if type(argumentos[i])~='number' then
			argumentos[i]=0
		end
	end
	skillBase,skillBonus,capImportance = argumentos[1],argumentos[2],argumentos[3]

	-- If needed, the Header can be moved outside
	local Header = '{| class = "mw-collapsible wikitable" width="180" style="text-align: center;"\r\n' -- May just call it from outside.
	Header = Header..'! rowspan=2 | Mining Skill Level'..'\r\n'
	Header = Header..'! colspan=3 | Deep Drilling Speed<br/>(Real time at 1x speed)'..'\r\n'
	Header = Header..'|-\r\n'
	Header = Header..'! 100% Manipulation !! 125% Manipulation !! 150% Manipulation'..'\r\n'
	local line, cuerpo = "", ""
	local factor = 0
	local val1, val2, val3 = 0,0,0
	local time1, time2, time3 = 0,0,0
	
	for i = 0, 20 do --This creates the table itself.
		line = "|-\r\n!"..i.."\r\n|" --Just for order
		factor = skillBase + tonumber(skillBonus) * i
		val1 = math.max(factor, 0)
		time1 = 14000/(val1*3600) -- This is time in minutes. Because factor is a percentage, I need to multiply this by 100 to compensate.
		-- This formats the number as a percent value with X decimals, rounded up. Change to %.0f for no decimals.
		R_Pval= string.format("%.0f", val1*100).."% <br/>"..string.format("(%.2f min)", time1)

		val2 = factor * ( 1 + capImportance * 0.25)
		val2 = math.max(val2, 0)
		time2 = 14000/(val2*3600)
		R_Sval= string.format("<td>%.0f", val2*100).."% <br/>"..string.format("(%.2f min)", time2).."</td>"

		val3 = factor * ( 1 + capImportance * 0.5)
		val3 = math.max(val3, 0)
		time3 = 14000/(val3*3600)
		R_Tval= string.format("<td>%.0f", val3*100).."% <br/>"..string.format("(%.2f min)", time3).."</td>"
		
		cuerpo = cuerpo..line..R_Pval..R_Sval..R_Tval.."\r\n"
	end

	return Header..cuerpo.."|}" --This should be the entire table. I may be a space short.
end

--[[
Wrapper function that does basic argument processing. This ensures that all functions from #invoke can use either the current
frame or the parent frame, and it also trims whitespace for all arguments and removes blank arguments.
]]

local mt = { __index = function(t, k)
	return function(frame)
		if not getArgs then
			getArgs = require('Module:Arguments').getArgs
		end
		return wrap[k](getArgs(frame))  -- Argument processing is left to Module:Arguments. Whitespace is trimmed and blank arguments are removed.
	end
end }

return setmetatable(p, mt)


-- END OF MODULE