Work Speed Factor
Jump to navigation
Jump to search
This article is about the multiplier on work speed. For the mulitplier on products, see Work Efficiency Factor.
Work Speed Factor is a stat: Work speed is multiplied by this value. Its minimum allowed value is 10%. Its default value is 100%. This acts as a multiplier on the time a job takes to be completed at the work table. For example, a value of 50% would result in the job to take twice as long as if it would be done with a value of 100%.
The default value is 100%. The minimum value is 10%.
Offset[edit]
First of all the following offset might affect the Work Speed Factor:
- +6% for a maximum of 2 Tool cabinets per workstation
Factors[edit]
After the offset the following factors might affect the Work Speed Factor:
- ×Unpowered Work Speed Factor if unpowered (currently only the Electric tailor bench has an Unpowered Work Speed Factor of 50%, all other electric work tables stop working entirely when unpowered)
- ×70% if the temperature is below 10 °C (50 °F)
- ×90% if the work table is outdoors