Work Speed Factor
This article is about the multiplier on work speed. For the mulitplier on products, see Work Efficiency Factor.
Work Speed Factor is a stat: Work speed is multiplied by this value. Its minimum allowed value is 10%. Its default value is 100%. This acts as a multiplier on the time a job takes to be completed at the work table. For example, a value of 50% would result in the job to take twice as long as if it would be done with a value of 100%.
The default value is 100%. The minimum value is 10%.
Offset
First of all the following offset might affect the Work Speed Factor:
- +6% for a maximum of 2 Tool cabinets per workstation
Factors
After the offset the following factors might affect the Work Speed Factor:
- ×Property:Unpowered Work Speed Factor if unpowered (currently only the Electric tailor bench has an Unpowered Work Speed Factor of Expression error: Unexpected * operator.%, all other electric work tables stop working entirely when unpowered)
- ×70% if the temperature is below 5 °C (41 °F)
- ×90% if the work table is outdoors