Difference between revisions of "Watermill generator"

From RimWorld Wiki
Jump to navigation Jump to search
Line 11: Line 11:
 
| power = + 1100
 
| power = + 1100
 
| flammability = 1.0
 
| flammability = 1.0
 +
| research = Watermill Generator
 
| work to make = 4000
 
| work to make = 4000
 
| resource 1 = Wood
 
| resource 1 = Wood

Revision as of 23:08, 28 August 2021

Watermill generator

Watermill generator

Produces electricity from a river. Must be placed with its wheel in moving water. If watermills are placed too close together, the turbulence they generate will interfere and reduce power generation.

Base Stats

Type
BuildingsPower
Market Value
600 Silver [Note]
HP
400
Flammability
100%

Building

Size
5 × 6
Placeable
Yes
Power
+ 1100 W

Creation

Required Research
Watermill generator
Skill Required
Construction 6
Work To Make
4,000 ticks (1.11 mins)
Resources to make
Wood 280 + Steel 80 + Component 3

Watermill generators are built on moving water to generate a constant 1100W of electricity, regardless of weather or other conditions.

A watermill generator must be placed:

  1. with its water wheel entirely in moving water,
  2. with its base on tiles that can support Heavy (for example, not on a bridge or marsh),
  3. with neither its housing nor wheel overlapping any other buildings or walls.

The base is a 3x3 square in the middle of the housing, which is a 5x5 square. Then the 1x5 waterwheel is attached to the housing, making the total footprint 5x6. Only the base must be on firm ground, the rest of the housing may be over water.

When placing the watermill generator, the blueprint will show:

  1. The base of the generator (in white)
  2. The housing of the generator (green if placeable, red if not)
  3. The waterwheel of the generator (green if placeable, red if not)
  4. The exclusion zone, explained below (blue on previously built watermills, green if OK, flashing orange if overlapping)


Power output does not depend on water tiles covered. However, the output of watermills will be reduced to 30% (330W) if you overlap their exclusion zones. The exclusion zones are 13x7 rectangles, extending 4 squares above, below and outside the mill. If you wish to build multiple maximally efficient watermills, they will need to be spread out a bit making them slightly harder to defend than most other power generating systems.

The 30% reduction does not stack, so given a sufficiently straight river, an alternative strategy to maximize power output would be to cram as many watermill generators as possible along both sides of the river bank.

Bridges do not interfere with power generation if built within the generator's exclusion zone.

Requires the Watermill Generator research to be completed.

Version history

Introduced in Beta 19.