Watermill generator
This article is suggested to be rewritten. Reason: Format standardisation. You can help the RimWorld Wiki by improving it. |
This article is a stub. You can help RimWorld Wiki by expanding it. Reason: Please add a reason . |
Watermill generator
Produces electricity from a river. Must be placed with its wheel in moving water. If watermills are placed too close together, the turbulence they generate will interfere and reduce power generation.
Base Stats
Building
- Size
- 5 × 6
- Placeable
- Yes
- Power
- + 1100 W
Creation
- Skill Required
- Construction 6
- Work To Make
- 4,000 ticks (1.11 mins)
- Deconstruct yield
- 210 + 60 + 2
Watermill generators are built on moving water to generate a constant 1100W of electricity, regardless of weather or other conditions.
A watermill generator must be placed:
- with its water wheel in moving water,
- with its base on tiles that can support Heavy (for example, not on a bridge or marsh).
When placing the watermill generator, the blueprint will show:
- The base of the generator (white if placeable, red if not)
- The exclusion zone, explained below (blue if normal, orange if overlapping)
- The mill of the generator (green zone, cannot overlap)
Power output does not depend on water tiles covered. However, the output of watermills will be reduced to 30% (330W) if you overlap their exclusion zones. If you wish to build multiple maximally efficient watermills, they will need to be spread out a bit making them slightly harder to defend than most other power generating systems.
The 30% reduction does not stack, so given a sufficiently straight river, an alternative strategy to maximize power output would be to cram as many watermill generators as possible along both sides of the river bank.
Bridges do not interfere with power generation if built within the generator's exclusion zone.
Requires the Watermill Generator research to be completed.
Version history
Introduced in Beta 19.